Monel 400 Flanges

ANSI B16.5 Alloy 400 Ring Type Joint Flanges, Monel UNS N04400 Pipe Flanges, Monel 400 Industrial Flanges, Monel DIN 2.4360 Socket Weld Flanges, Monel 400 Nippo Flanges Manufacturer in India.

ASME SB564 Alloy 400 Lap Joint Flange, Alloy 400 Blind Flanges, ANSI B16.5 Alloy 400 Orifice Flange, ASTM B564 Monel 400 Threaded Flanges, Monel 400 Spectacle Blind Flanges Supplioers in India.

We are Manufacturer, Supplier & Exporter of Monel 400 Flanges, which is attacked in sulfur-bearing gases above approximately 700 Degree F and molten sulfur attacks the alloy at temperatures over approximately 500 Degree F. Attempts to produce fractures in the torsion specimens by reducing the minimum area by 75% were not successful because of the toughness of Monel 400 Pipe Flanges. Monel 400 Slip On Flanges is often used for Industrial heat exchangers and Boiler feed water heaters. Most conventional welding processes may be used to join Monel 400 Weld Neck Flanges to itself or to dissimilar metals. Joint design of Monel 400 Socket Weld Flanges is similar to that used for austenitic stainless steels with two exceptions.

We offer W.Nr 2.4360 Monel 400 Male & Female Flanges to the oilfield fabrication, offshore and to petrochemical industries; our flanges are age hardened and are resistant to caustic solutions, seawater, and to chloride solutions and nitric acids, under oxidising and reducing temperatures. UNS N04400 Flanges has high strength and can only be hardened by cold working. Due to its resistance to deterioration, WNR 2.4360 Flanges is most often used in parts found in marine and chemical environments. We offer these Monel Alloy 400 products in custom-made shapes and sizes as per the requirements given by our clients, and that too at an affordable and market leading prices. Hence we are the leading manufacturer and exporter of monel 400 flanges that design the product by using high-quality raw material. on the other hand to obtain a product in terms of different grade, shapes and sizes we hire the best high tech machinery and equipment.

Specification

Grade	Monel 400 | UNS N04400
Standard	ASTM B564, ASME SB564
Dimensions	ANSI / ASME B16.5, B16.47 Series A & B, B.16.48, BS4504, BS10, DIN, EN-1092, MSS SP44
Size	1/2"NB - 60"NB
Class / Pressure Rating	150 Class, 300 Class, 718 Class, 900 Class, 1500 Class, 2500 Class, PN6, PN10, PN16, PN25, PN40, PN64, etc.
Form	Slip on Flanges (SORF), Threaded Flanges, Weld neck Flanges (WNRF), Blind Flanges, Socket weld Flanges, Lap Joint Flanges, Ring Type Joint Flanges, Spectacle Blind Flanges, Spacer Ring Flanges, Long weld Neck Flanges, Nipo Flange, Nipolet Flanges, Plate Flanges, Flat Flange, Orifice Flanges, Forged Flanges
Flange Face Type	Flat Face (FF), Raised Face (RF), Ring Type Joint(RTJ)

Grade Specification

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN
Monel 400	2.4360	N04400	NW 4400	NA 13	МНЖМц 28-2,5-1,5	NU-30M	NiCu30Fe

Chemical Composition

Grade	C	Mn	Si	S	Cu	Fe	Ni
Monel 400	0.30 max	2.00 max	0.50 max	0.024 max	28.00 – 34.00	2.50 max	63.00 min

Mechanical Properties

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Monel 400	8.8 g/cm3	1350 °C (2460 °F)	Psi – 80,000 , MPa – 550	Psi – 35,000 , MPa – 240	40 %

Other Types of Monel 400 Flanges