Inconel 600/601 Fasteners

Inconel 600 Eye Bolts, Inconel 601 Fasteners, ASTM ASTM B 166 Inconel 601 Hex Bolts, Inconel 600 Stud Bolts, Inconel 601 Washers, Inconel 600 Anchor Bolts, Inconel 601 Washer, DIN 2.4816 / 2.4851 Fasteners Manufacturer in India.

Inconel 601 Heavy Hex Bolts, Alloy 600 Square Bolts, werkstoff nr. 2.4816 / 2.4851 Socket Screw, Inconel 600 U Bolts, UNS No. N06600 / N06601 Bolts, Inconel 600 Nuts, Inconel 601 Screw, Inconel 600 Studs Suppliers in India.

We are Manufacturer, Supplier & Exporter of Inconel 600 / 601 Fasteners among customers. Inconel 600 /601 Fasteners (UNS N06600) was designed for service temperatures from cryogenic to elevated temperatures in the range of 2000 Degree F. Inconel 600 / 601 Fasteners (UNS N06601) stands out because of its resistance to soaring temp oxidation, continuing extremely resistant to oxidation in the course of 2200 Deg F. We are tangled in supplying and are also stockiest of Inconel 600 / 601 Fasteners. The product is manufactured on basis of international standards and norms, with best quality raw material used in it. Various grades are available in Inconel Alloy Fasteners such as 600, 601.

Inconel fasteners, like Inconel 600 & 601 fasteners, are a family of nickel-chromium-molybdenum alloys used for their high strength at elevated temperatures and good corrosion resistance. The high alloy content of Inconel 600 / 601 fasteners enables it to withstand a wide variety of severe corrosive environments. Our Inconel 600 / 601 Nuts can be heat treated by annealing, but does not harden by heat treatment. These Inconel 600 / 601 Bolts is used for valves, fittings and other components exposed to corrosive attack from 1100 Degree F – 1800 Degree F. Another important feature of our Inconel Alloy Washers is excellent resistance to chloride stress-corrosion cracking. Forming at temperatures of these Inconel Alloy Screws between 1200 Degree F and 1600 Degree F (650 Degree C – 870 Degree C) can result in cracking of the work-piece.

Specification

Grade	Inconel Alloy 600 / UNS N06600, Inconel Alloy 601 / UNS N06601
Specification	IS, BS, ASTM, ASME
Standard	ASTM B166, ASME SB166
Length	3mm to 200mm
Size	3/6" to 2", M3 - M56, Custom Sizes
Form	Screw, Nuts, Bolts, Washers

Grade Specification

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN
Inconel 600	2.4816	N06600	NCF 600	NA 13	МНЖМц 28-2,5-1,5	NC15FE11M	NiCr15Fe
Inconel 601	2.4851	N06601	NCF 601	NA 49	XH60BT	NC23FeA	NiCr15Fe

Chemical Composition

Grade	Ni	Fe	C	Mn	Si	Cu	Cr	S	Al
Inconel 600	72.0 min	6.0 - 10.0	0.15 max	1.00 max	0.50 max	0.50 max	14.0 - 17.0	0.015 max	-
Inconel 601	61.5 min	14	0.05 max	1.0 max	0.50 max	1.0 max	21.0 - 25.0	0.015 max	1.0 – 1.7

Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.4 g/cm3	1370-1425 ℃	550 min.	240 min.	30 %

Other Types of Inconel 600/601 Fasteners